Canada PR for Construction Millwrights and Industrial Mechanics
Quick facts
Want to move to Canada as a millwright or industrial mechanic? This guide explains exactly how Canada PR for millwrights and industrial mechanics works in 2026. Under the National Occupational Classification (NOC) 2021, millwrights and industrial mechanics are classified as NOC 72400 – Construction Millwrights and Industrial Mechanics, a TEER 2 occupation. That makes the work skilled experience for Canada Express Entry, and IRCC lists NOC 72400 in its Trade category for category-based draws.
Below you will find the duties IRCC and ESDC expect you to have performed, the NOC codes people confuse with 72400, licensing and credential steps, language and CRS targets, recent draw results, Job Bank wages and government fees. Facts are taken from Government of Canada sources and dated, because draw results and rules change during the year. If you want your profile checked by a regulated Canada PR consultant, our team can help.
Can Construction Millwrights and Industrial Mechanics Get Canada PR in 2026?
Yes. Millwrights and industrial mechanics with at least one year of skilled work in NOC 72400 can qualify for permanent residence through Express Entry under the FSW, CEC and FST. Because NOC 72400 is in a skilled-trade group, the Federal Skilled Trades Program is also open to you.
Being on the trade list means IRCC can hold rounds that only rank candidates with experience in the listed occupations, which usually means competing against a smaller group. Your experience for these draws can be from Canada or abroad.
NOC 72400 at a Glance
| Item | Detail |
|---|---|
| NOC 2021 code | 72400 – Construction Millwrights and Industrial Mechanics |
| TEER category | TEER 2 (usually requires a college diploma of two years or more, an apprenticeship of two years or more, or supervisory responsibilities) |
| Express Entry programs | Federal Skilled Worker Program (FSW), Canadian Experience Class (CEC), Federal Skilled Trades Program (FST) |
| 2026 category | Trade |
| Experience needed for category draws | 12 months full-time (or equal part-time) in the past 3 years, in Canada or abroad |
| Credential assessment | ECA from an IRCC-designated organization (WES, ICAS, CES, IQAS or ICES) |
| Regulated in Canada? | No licence required by law |
| Median wage (Canada) | CAD 37.00 per hour (Job Bank, updated 19 November 2025) |
What Construction Millwrights and Industrial Mechanics Do Under NOC 72400
ESDC’s NOC profile describes the group like this: Construction millwrights and industrial mechanics install, maintain, troubleshoot, overhaul and repair stationary industrial machinery and mechanical equipment, and textile machinery mechanics are included. Millwrights work for millwrighting contractors, while industrial mechanics work in manufacturing plants, utilities and other industrial settings.
The main duties listed for NOC 72400 include:
- Read blueprints, diagrams and schematics to plan work
- Install, align, dismantle and move stationary equipment such as pumps, fans, tanks, conveyors, furnaces and generators
- Operate cranes, jacks and tractors to position machinery and parts
- Inspect equipment and diagnose irregularities and malfunctions
- Install, troubleshoot and maintain power transmission, vacuum, hydraulic, pneumatic and programmable logic control systems
- Repair or replace defective parts and make parts on lathes and grinders
- Carry out routine maintenance and assemble machinery before installation, including welding
Example job titles classified under NOC 72400:
- Millwright
- Construction millwright
- Maintenance millwright
- Industrial mechanic
- Plant equipment mechanic
- Textile machinery mechanic
- Loom fixer
- Industrial mechanic apprentice
Your job title back home does not have to match these exactly. IRCC looks at what you did. To claim NOC 72400, your experience should show that you performed the actions in the lead statement and most of the main duties above, including the essential ones. You can read the full NOC 72400 profile on the ESDC website.
Choosing the Right NOC Code: 72400 or Something Else?
Picking the wrong code is one of the most common reasons Express Entry applications are refused, and it matters even more for category draws because only the listed codes are eligible. ESDC specifically excludes these roles from NOC 72400:
- NOC 72401: Heavy-duty equipment mechanics (also on IRCC’s 2026 category lists)
- NOC 22312: Industrial instrument technicians and mechanics
- NOC 72020: Industrial mechanic supervisors (in Contractors and supervisors, mechanic trades)
If most of your duties match one of these codes instead, you must use that code in your profile, even if your employer calls you a millwright or industrial mechanic. Where your role mixes duties, choose the code that matches the main duties you performed for most of your working time, and make sure your reference letters say the same thing.
Are Construction Millwrights and Industrial Mechanics in Demand in Canada? 2026 Trade Draws
For the Trade category, IRCC requires at least 12 months of full-time work (or an equal amount of part-time work) in a single listed occupation within the past 3 years. The experience does not need to be continuous, and it can be gained in Canada or abroad. The occupation can be different from the primary occupation in your profile, as long as it is one of the 25 listed codes.
Recent Trade rounds, from IRCC’s rounds of invitations data:
| Date | Invitations | Lowest CRS score invited |
|---|---|---|
| 1 October 2026 | 3,500 | 476 |
| 2 April 2026 | 3,000 | 477 |
Important for 2026: IRCC changed the Comprehensive Ranking System on 3 November 2026. Cut-offs from rounds held before that date were calculated under the old points grid, so treat them as a rough guide rather than a target.
Other recent rounds that are open to millwrights and industrial mechanics who qualify:
| Round type | Date | Invitations | Lowest CRS score |
|---|---|---|---|
| Canadian Experience Class | 15 October 2026 | 2,500 | 519 |
| Provincial Nominee Program | 26 October 2026 | 792 | 761 |
| French-language proficiency | 27 October 2026 | 5,000 | 407 |
Canada PR Pathways for Construction Millwrights and Industrial Mechanics
| Pathway | Who it suits | Key requirement |
|---|---|---|
| Federal Skilled Worker (FSW) | Millwrights and industrial mechanics applying from outside Canada | 1 year of continuous skilled work in the last 10 years, CLB 7, 67 of 100 points |
| Canadian Experience Class (CEC) | Millwrights and industrial mechanics already working in Canada | 1 year of skilled Canadian work in the last 3 years, CLB 5 |
| Federal Skilled Trades (FST) | Qualified tradespeople | 2 years of trade work in the last 5 years, a job offer or a Canadian certificate of qualification, CLB 5/4 |
| Trade draws | Express Entry candidates who meet the category rule | 12 months in NOC 72400 in the past 3 years |
| Provincial Nominee Program (PNP) | Millwrights and industrial mechanics a province wants to attract | Nomination by a province or territory, worth 600 CRS points in Express Entry |
Federal Skilled Worker Requirements for Construction Millwrights and Industrial Mechanics
- Work experience: at least 1 year of continuous, paid, full-time work (or 1,560 hours part-time) in NOC 72400 within the last 10 years. This must be your primary occupation.
- Language: CLB 7 (or NCLC 7 in French) in reading, writing, listening and speaking.
- Education: a Canadian credential, or a foreign credential with an Educational Credential Assessment (ECA).
- Selection points: at least 67 out of 100 on the FSW grid.
- Proof of funds: required unless you are authorized to work in Canada and have a valid job offer.
The FSW grid is separate from the CRS. It is a pass mark you must reach before you can enter the pool:
| FSW selection factor | Maximum points |
|---|---|
| Language skills (English and/or French) | 28 |
| Education | 25 |
| Work experience | 15 |
| Age | 12 |
| Arranged employment in Canada | 10 |
| Adaptability | 10 |
| Total (pass mark 67) | 100 |
Many applicants are surprised that CLB 7 alone is often not enough. A 30-year-old millwright or industrial mechanic with a bachelor’s degree, 3 years of experience and CLB 7 in every English ability scores about 60 points: 16 for language (4 per ability), 21 for education, 11 for experience and 12 for age. Raising English to CLB 9 (6 points per ability) adds 8 points and takes the same person to 68, above the pass mark. A second official language, a spouse with English at CLB 4 or better, or earlier study or work in Canada can also add points.
Canadian Experience Class for Construction Millwrights and Industrial Mechanics in Canada
If you are already working in Canada, the CEC needs at least 1 year (1,560 hours) of skilled Canadian work experience in the 3 years before you apply, gained while you had temporary resident status and authorization to work. Because NOC 72400 is TEER 2, the language minimum is CLB 5 in all four abilities. Self-employment and work done while you were a full-time student do not count toward the CEC.
CEC candidates do not need to show proof of funds and do not need an ECA to qualify, although an ECA earns CRS points for education completed abroad. Many millwrights and industrial mechanics reach the CEC after studying or working in Canada; see our guides to working in Canada and studying in Canada.
Federal Skilled Trades Program for Construction Millwrights and Industrial Mechanics
NOC 72400 belongs to one of the trade groups covered by the Federal Skilled Trades Program, which has lower language requirements than FSW and no points grid. To qualify you need:
- At least 2 years of full-time work (or an equal amount of part-time work) in the trade within the 5 years before you apply
- To meet the job requirements of the NOC profile, except for the need to hold a certificate of qualification
- Either a valid job offer for full-time work of at least 1 year, or a certificate of qualification in your trade issued by a Canadian provincial, territorial or federal authority
- CLB 5 for speaking and listening and CLB 4 for reading and writing
For millwrights and industrial mechanics, the certificate route usually means having your foreign experience assessed by the apprenticeship authority of the province where you want to work and passing its trade exam. The certificate also adds CRS points under skill transferability.
Trade Certification for Construction Millwrights and Industrial Mechanics in Canada
In Canada, trades are certified by provinces and territories. For NOC 72400, certification is voluntary in every province and territory. A compulsory trade means you cannot legally work in it without a certificate of qualification (or registered apprentice status); in a voluntary trade, certification is optional but it helps with hiring and adds CRS points.
ESDC’s employment requirements for NOC 72400:
- Usually completion of secondary school plus training courses or a vocational program
- A three- to four-year apprenticeship, or over five years of work experience plus industrial machinery repair or millwrighting courses, to be eligible for trade certification
- Industrial mechanic (millwright) certification is available, but voluntary, in all provinces and territories
- Construction millwright certification is voluntary and available in Quebec and Ontario
- Red Seal endorsement is available to qualified workers who pass the interprovincial Red Seal examination
The certificate-granting body is the provincial apprenticeship authority; certification is voluntary but most large employers look for it. Starting this process early lets you work in your trade soon after landing, and in compulsory-trade provinces it is a legal requirement before you start work.
Educational Credential Assessment (ECA) for Construction Millwrights and Industrial Mechanics
An ECA confirms that your foreign degree or diploma is valid and equal to a Canadian credential. It is required for the Federal Skilled Worker Program and earns CRS points for education completed abroad. Millwrights and industrial mechanics can use any of IRCC’s general designated organizations:
- World Education Services (WES)
- International Credential Assessment Service of Canada (ICAS)
- Comparative Education Service – University of Toronto School of Continuing Studies
- International Qualifications Assessment Service (IQAS)
- International Credential Evaluation Service – British Columbia Institute of Technology (ICES)
An ECA must be less than 5 years old when you create your profile and when you submit your application. It is an immigration document only and does not license you to work as a millwright or industrial mechanic. See IRCC’s education assessment page for the current list.
Language Test Requirements for Construction Millwrights and Industrial Mechanics
| Program | Minimum for NOC 72400 |
|---|---|
| Federal Skilled Worker | CLB 7 / NCLC 7 in all four abilities |
| Canadian Experience Class (TEER 2) | CLB 5 / NCLC 5 in all four abilities |
| Federal Skilled Trades | CLB 5 speaking and listening, CLB 4 reading and writing |
| French-language category draws | NCLC 7 in all four abilities |
IRCC accepts CELPIP-General, IELTS General Training and PTE Core for English, and TEF Canada and TCF Canada for French. Results must be less than 2 years old when you create your profile and when you apply. Scores above the minimum are worth many extra CRS points, and a good French result also opens French-language rounds, which have had some of the lowest cut-offs in 2026.
CRS Score for Construction Millwrights and Industrial Mechanics: How the New 2026 System Works
Every Express Entry candidate is ranked by the Comprehensive Ranking System (CRS). Category draws only rank candidates eligible for that category, which is why trades cut-offs can differ from general rounds. IRCC introduced a revised CRS on 3 November 2026 and paused rounds for up to two weeks while it recalculated scores.
| CRS factor (from 3 November 2026) | With spouse | Without spouse |
|---|---|---|
| Age | 100 | 110 |
| Education | 140 | 150 |
| Official languages | 150 | 160 |
| Labour market integration (new) | 140 | 150 |
| Core factors total | 530 | 570 |
| Spouse or partner factors | 40 | – |
| Skill transferability | 100 | 100 |
The new labour market integration factor rewards Canadian work experience and high-wage occupations or job offers, and a job offer no longer needs a Labour Market Impact Assessment (LMIA) to count. Additional points include 600 for a provincial nomination, up to 50 for strong French, up to 30 for Canadian education and 15 for a brother or sister in Canada.
Ways millwrights and industrial mechanics can raise their score:
- A Canadian certificate of qualification in your trade can add up to 50 points under skill transferability.
- Official languages are one of the largest core factors (up to 150 points with a spouse or 160 without), so moving from CLB 7 to CLB 9 or higher is usually one of the most effective ways to raise your score.
- If you have a spouse, their language results and education can add points, and in some cases listing them as the principal applicant gives a higher score.
Use our Canada PR points calculator to estimate your score before you pay for tests and assessments.
Reference Letters for NOC 72400: What to Include
Your reference letters are how IRCC checks that your experience really is NOC 72400. Each letter should be on company letterhead with the employer’s contact details and the signature of your supervisor or HR officer, and it should state your job title, dates of employment, hours per week, salary and benefits, and your main duties.
Write the duties in your own employer’s words, but make sure they cover the work that defines millwrights and industrial mechanics. For NOC 72400, that means duties such as:
- read blueprints, diagrams and schematics to plan work
- install, align, dismantle and move stationary equipment such as pumps, fans, tanks, conveyors, furnaces and generators
- operate cranes, jacks and tractors to position machinery and parts
- inspect equipment and diagnose irregularities and malfunctions
- install, troubleshoot and maintain power transmission, vacuum, hydraulic, pneumatic and programmable logic control systems
Do not copy the NOC text word for word. Officers notice identical wording, and it can make your experience look less credible. Describe the same activities using your own job’s details.
Book a consultation with our Canada PR consultantProvincial Nominee Programs for Construction Millwrights and Industrial Mechanics
Provinces and territories use the Provincial Nominee Program to choose workers for their own labour markets. Express Entry-linked streams can nominate candidates directly from the pool, and a nomination adds 600 CRS points. The 26 October 2026 PNP round invited 792 candidates with a lowest score of 761, which shows how decisive a nomination is.
Each province sets its own occupation lists, job-offer rules and intake dates, and they change often. Programs that millwrights and industrial mechanics often look at include the British Columbia PNP, Ontario PNP, Alberta PNP, Manitoba PNP, Nova Scotia PNP and New Brunswick PNP.
Salary for Construction Millwrights and Industrial Mechanics in Canada
Job Bank’s prevailing wages for NOC 72400 (updated 19 November 2025), in Canadian dollars per hour:
| Area | Low | Median | High |
|---|---|---|---|
| Canada | 24.00 | 37.00 | 52.00 |
| Newfoundland and Labrador | 26.00 | 42.35 | 57.30 |
| Prince Edward Island | 22.00 | 30.04 | 37.00 |
| Nova Scotia | 22.44 | 33.00 | 45.60 |
| New Brunswick | 21.00 | 30.00 | 50.43 |
| Quebec | 24.00 | 33.33 | 49.00 |
| Ontario | 23.00 | 35.59 | 48.50 |
| Manitoba | 24.00 | 35.00 | 50.00 |
| Saskatchewan | 26.00 | 42.00 | 57.83 |
| Alberta | 27.95 | 42.00 | 59.63 |
| British Columbia | 25.25 | 42.00 | 55.00 |
| Yukon | 22.43 | 42.07 | 58.17 |
| Northwest Territories | 25.63 | 46.48 | 74.64 |
Pay depends on province, employer, union scales and experience. Check Job Bank wages for NOC 72400 for city-level figures before you compare job offers.
Proof of Funds for Express Entry
FSW and FST candidates must show settlement funds unless they are authorized to work in Canada and have a valid job offer. CEC candidates are exempt. IRCC’s current minimums (updated 7 July 2025):
| Family members | Funds required (CAD) |
|---|---|
| 1 | $15,263 |
| 2 | $19,001 |
| 3 | $23,360 |
| 4 | $28,362 |
| 5 | $32,168 |
| 6 | $36,280 |
| 7 | $40,392 |
| Each additional member | $4,112 |
Funds must be available to you, not borrowed, and you will usually show them with official bank letters covering recent months.
Canada PR Cost for Construction Millwrights and Industrial Mechanics
| Government fee | Amount (CAD) |
|---|---|
| Principal applicant (processing fee + right of permanent residence fee) | $1,590 |
| Spouse or partner (processing fee + right of permanent residence fee) | $1,590 |
| Each dependent child | $270 |
| Biometrics | $85 per person, or $170 for a family applying together |
These are IRCC’s current fees. Budget separately for the ECA, language test, trade assessment and exam fees, medical exam, police certificates and translations, which are paid to third parties.
How to Get Canada PR as a Millwright or Industrial Mechanic from India: Step by Step
- Confirm NOC 72400. Compare your duties with the lead statement, main duties and exclusions above.
- Take an approved language test (CELPIP-General, IELTS General Training or PTE Core, or TEF/TCF Canada) and aim above the minimum.
- Get your credential assessment from an IRCC-designated organization such as WES.
- Start trade certification with the provincial apprenticeship authority if you plan to use FST without a job offer or work in a compulsory trade.
- Create your Express Entry profile with accurate dates, hours and duties for each job.
- Watch category, CEC, general, French and PNP rounds and apply to provincial streams that fit your profile.
- Receive an Invitation to Apply (ITA) and submit your complete application within 60 days.
- Complete biometrics, the medical exam with an IRCC panel physician and police certificates, then receive your confirmation of permanent residence.
What Happens After You Receive an Invitation to Apply
An Invitation to Apply is the point where your Express Entry profile turns into a permanent residence application. For millwrights and industrial mechanics, the documents that most often cause delays are reference letters that do not show NOC 72400 duties clearly and proof of funds that does not cover the required period. What happens next:
- You have 60 days to submit a complete electronic application with all supporting documents.
- IRCC issues an acknowledgement of receipt and checks that the application is complete.
- You receive a biometrics instruction letter and give fingerprints and a photo at a Visa Application Centre, normally within 30 days.
- You complete the medical exam with an IRCC panel physician, if you did not do it before applying.
- IRCC verifies your work experience, education, funds, background and security.
- If approved, IRCC asks for your passport so it can issue your confirmation of permanent residence (COPR) and, for Indian citizens, a permanent resident visa.
- You land in Canada before the COPR expires, and your PR card is mailed to your Canadian address.
Your Express Entry profile stays in the pool for 12 months. If you are not invited in that time, you can create a new profile, ideally with updated test scores or experience.
Including Your Family in Your Canada PR Application
You can include your spouse or common-law partner and dependent children in the same application. A dependent child is generally under 22 and not a spouse or common-law partner. Every family member listed must pass a medical exam, and those aged 18 or older need police certificates, even if they will not come to Canada with you right away.
Your spouse also affects your CRS score. If your partner has a higher language score or more education, compare your total with each of you as the principal applicant. Only the principal applicant needs experience in NOC 72400 for category draws.
Documents Checklist
- Passport and identity documents
- Language test results (less than 2 years old)
- ECA report (less than 5 years old)
- Reference letters for every NOC 72400 job: title, duties, hours, dates and salary
- Pay slips, tax records or bank statements that support your employment
- Apprenticeship records, trade certificates and any Canadian certificate of qualification
- Proof of funds (if required)
- Police certificates for each country you lived in for 6 months or more since age 18 (from India, through Passport Seva or an Indian mission abroad)
- Medical exam confirmation
- Marriage and birth certificates for accompanying family members
Common Mistakes Construction Millwrights and Industrial Mechanics Make
- Using the wrong code. Roles such as heavy-duty equipment mechanics and industrial instrument technicians and mechanics have their own NOC codes. Claiming 72400 for that work can lead to refusal.
- Counting the wrong experience. Category draws need 12 months in one listed occupation within the last 3 years. Older or shorter experience does not count for the category, even if it counts for FSW.
- Letting documents expire. Language results last 2 years and ECAs 5 years. An expired document at the time you apply can sink the application.
- Starting work in a compulsory trade without certification. In provinces where your trade is compulsory, you must hold a certificate of qualification or be a registered apprentice first.
- Inflating duties or hours. IRCC can verify employment, and misrepresentation can lead to a five-year ban.
How GIEC Global Can Help
GIEC Global helps skilled workers plan their move to Canada. Canadian immigration advice is provided by our Regulated Canadian Immigration Consultant, Yun Zhan (RCIC ID R711892). As your Canada PR consultant, our team can confirm whether your experience fits NOC 72400, review your reference letters against the NOC duties, estimate your CRS score under the new 2026 grid, plan your trade certification alongside Express Entry, and track trades and provincial rounds for you.
Book a consultation with our Canada PR consultantRelated Trades Occupations for Canada PR
- Canada PR for Plumbers (NOC 72300)
- Canada PR for Gas Fitters (NOC 72302)
- Canada PR for Carpenters (NOC 72310)
- Canada PR for Cabinetmakers (NOC 72311)
- Canada PR for Bricklayers (NOC 72320)
- Canada PR for Heavy-Duty Equipment Mechanics (NOC 72401)
- Canada PR for HVAC and Refrigeration Mechanics (NOC 72402)
- Canada PR for Electrical Mechanics (NOC 72422)
Related Canada Immigration Guides
- Canada Express Entry
- Canada Provincial Nominee Program
- Canada PR points calculator
- Work in Canada
- Canada immigration overview
- Talk to a Canada PR consultant
Information is current as of 13 November 2026 and is general guidance, not legal advice. Check IRCC’s category-based selection page and the relevant provincial body before applying.
Frequently Asked Questions
Can millwrights and industrial mechanics get Canada PR in 2026?
Yes. NOC 72400 is a TEER 2 occupation, so it counts as skilled work for Express Entry under the FSW, CEC and FST, and it is on IRCC's Trade category list.
What is the NOC code for millwrights and industrial mechanics in Canada?
NOC 2021 code 72400, Construction Millwrights and Industrial Mechanics, in TEER category 2. Related roles such as Heavy-duty equipment mechanics have their own codes, so match the code to your actual duties.
Are millwrights and industrial mechanics in demand in Canada?
NOC 72400 is one of the occupations IRCC lists for Trade category-based draws, which IRCC uses to invite candidates in occupations it wants to target.
What CRS score do millwrights and industrial mechanics need for Canada PR?
There is no fixed score. Recent Trade rounds invited candidates with lowest scores of 476 (1 October 2026) and 477 (2 April 2026)
Can I get Canada PR as a millwright or industrial mechanic without a job offer?
Yes. FSW and CEC do not require a job offer, and FST can be used with a Canadian certificate of qualification instead of an offer.
Do I need a Canadian licence or certificate before applying?
Not for FSW or CEC. For FST you need either a valid job offer or a Canadian certificate of qualification. To work, certification is voluntary in every province and territory.
Which ECA should millwrights and industrial mechanics get for Express Entry?
Any IRCC-designated general organization: WES, ICAS, the University of Toronto's Comparative Education Service, IQAS or ICES. The ECA must be less than 5 years old.
What IELTS or CLB score do millwrights and industrial mechanics need?
CLB 7 in all four abilities for FSW. For CEC the minimum is CLB 5 because NOC 72400 is TEER 2. FST needs CLB 5 for speaking and listening and CLB 4 for reading and writing. Higher scores add CRS points.
How much do millwrights and industrial mechanics earn in Canada?
Job Bank lists a national median of CAD 37.00 per hour for NOC 72400 (updated 19 November 2025). Pay varies by province, employer and experience.
How much work experience do millwrights and industrial mechanics need?
For the category: 12 months of full-time work (or equal part-time) in NOC 72400 within the past 3 years, in Canada or abroad. For FSW: 1 year of continuous full-time work (1,560 hours) in the last 10 years.
Can millwrights and industrial mechanics apply through the Federal Skilled Trades Program?
Yes. NOC 72400 is in a trade group covered by FST. You need 2 years of trade experience in the last 5 years, a valid job offer or a Canadian certificate of qualification, and CLB 5 speaking and listening with CLB 4 reading and writing.
How much proof of funds do I need for Express Entry?
FSW and FST candidates without a valid job offer need CAD 15,263 for one person, CAD 19,001 for two and CAD 28,362 for four, per IRCC's amounts updated 7 July 2025. CEC candidates are exempt.
What are the government fees for Canada PR?
CAD 1,590 for the principal applicant and for a spouse (processing fee plus right of permanent residence fee), CAD 270 per dependent child, and biometrics of CAD 85 per person or CAD 170 per family.
How do I get Canada PR as a millwright or industrial mechanic from India?
Confirm NOC 72400, take an approved language test, get your ECA, start trade certification, create an Express Entry profile, then apply within 60 days of receiving an Invitation to Apply, with police certificates from India through Passport Seva.
Can a Canada PR consultant help millwrights and industrial mechanics?
Yes. A Canada PR consultant can check that your experience fits NOC 72400, review reference letters, estimate your CRS score and plan certification. GIEC Global's advice is provided by Yun Zhan, Regulated Canadian Immigration Consultant (RCIC ID R711892).